| CENTER SECTION THICKNESS | 3.0 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 171.7 MILLIMETERS NOMINAL |
| CENTER SECTION HEIGHT | 61.7 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG CORNER RADIUS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.0 MILLIMETERS MINIMUM AND 9.3 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 3.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 70.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 20.0 MILLIMETERS NOMINAL |
| FIRST LEG OFFSET ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 6.5 MILLIMETERS MINIMUM AND 6.8 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 12.5 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 15.0 MILLIMETERS NOMINAL |
| SECOND LEG OFFSET ANGLE | 76.5 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 3.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 31.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 183.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | HAS SCREW AND CLAMP WELDED ON |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FMV-A YB 0103,CAGEC S3465 MFR REF 1ST TREATMENT RESPONSE OR YB 0103,TYPE B,CAGEC S3465 MFR REF 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | ZINC AND CHROMATE |