| CENTER SECTION HEIGHT | 5.185 INCHES MINIMUM AND 5.215 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.190 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.300 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.120 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | THREADED |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 1.120 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.300 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SPECIAL FEATURES | FIRST AND SECOND LEG W/THD MTG HOLES 0.190-32UNF-2B W/CBORE 0.250 DIA BY 0.135 IN. DP AND CSK 0.395 IN. DIA BY 82 DEG LOCATED ON OUTER FACES OF LEGS; THREE THD MTG HOLES IN CENTER LEG 0.112-40UNC-2B THRU LOCATED ON LONGITUDINAL CENTERLINE AND CENTERED W/1.500 IN. BETWEEN MTG CENTERS; 0.030 IN. BEND RADIUS TWO PLACES; COLOR 23538,FED-STD-595; INCL CHROMATE FINISH,MIL-C-5541,CL 1A AND PRIMER,EPOXY,MIL-P-85582 |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |