| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG ANGLE | 133.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.562 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.690 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.830 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG WIDTH | 1.530 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.1345 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA366 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.530 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.1345 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.510 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.530 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ZINC AND CHROMATE |