| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.197 INCHES NOMINAL0.197 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.281 INCHES NOMINAL |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.750 INCHES NOMINAL |
| BLOCK HEIGHT | 0.394 INCHES NOMINAL0.394 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.000 INCHES NOMINAL |
| CLAMPING HOLE DIAMETER | 0.516 INCHES NOMINAL SECOND HOLE |
| CLAMPING HOLE QUANTITY | 22 |
| CLAMPING HOLE DIAMETER | 0.390 INCHES NOMINAL FIRST HOLE |
| CRITICALITY CODE JUSTIFICATION | AGAVAGAV |
| OVERALL LENGTH | 1.625 INCHES NOMINAL1.625 INCHES NOMINAL |
| OVERALL WIDTH | 0.394 INCHES NOMINAL0.394 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| MATERIAL | PLASTIC |
| MOUNTING FACILITY | UNTHREADED HOLE(S)UNTHREADED HOLE(S) |
| MOUNTING HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM0.211 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 11 |
| SPECIAL FEATURES | NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| STYLE DESIGNATOR | RECTANGULAR |
| SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |