| DISTANCE BETWEEN HOLE CENTERS | 5.500 INCHES NOMINAL |
| CENTER SECTION WIDTH | 5.440 INCHES MINIMUM AND 5.560 INCHES MAXIMUM |
| CENTER SECTION HEIGHT | 0.730 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.090 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.250 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.100 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| INSIDE HEIGHT | 0.730 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.090 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PLATE, FUEL PUMP, TAN |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.408 INCHES MAXIMUM |
| MOUNTING HOLE TYPE | PLAIN |
| OVERALL HEIGHT | 0.820 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| OVERALL LENGTH | 6.400 INCHES NOMINAL |
| OVERALL WIDTH | 5.440 INCHES MINIMUM AND 5.560 INCHES MAXIMUM |
| SECOND LEG ANGLE | 0.250 DEGREES NOMINAL |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.100 INCHES NOMINAL |
| SLOT LENGTH | 0.408 INCHES MINIMUM AND 0.468 INCHES MAXIMUM |
| SLOT WIDTH | 0.249 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SPECIAL FEATURES | DIMENSIONS ARE FOR SLOTS AND NOT HOLE DIAMETERS |
| STYLE DESIGNATOR | QUADRUPLE ANGLE |
| SURFACE TREATMENT | PRIMER AND PAINT |