|
|
|
National Stock Number:
5365-00-891-3208
Federal Supply Class:
5365
National Item Identification Number:
008913208
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 100323 | 81873 | WOODWARD HRT INC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.926 INCHES MINIMUM AND 0.946 INCHES MAXIMUM | | HOLE DIAMETER | 0.202 INCHES MINIMUM AND 0.208 INCHES MAXIMUM | | OVERALL LENGTH | 1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM | | OVERALL WIDTH | 1.270 INCHES MINIMUM AND 1.290 INCHES MAXIMUM |
|
|