|
|
|
National Stock Number:
5365-01-055-8912
Federal Supply Class:
5365
National Item Identification Number:
010558912
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2426B14H01 | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 820-4551401H01 | 53711 | NAVAL SEA SYSTEMS COMMAND | | RO0070 | 13873 | DLA AVIATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.900 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.880 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.380 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | CRITICALITY CODE JUSTIFICATION | ZZZY | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | LAMINATION QUANTITY | 31 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.380 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.380 INCHES NOMINAL | | OVERALL LENGTH | 2.250 INCHES NOMINAL | | OVERALL WIDTH | 2.500 INCHES NOMINAL | | MATERIAL | COPPER ALLOY | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER RICHMOND PRODUCCTION STANDARD NO. RO0070 | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|