|
|
|
National Stock Number:
5365-01-071-7565
Federal Supply Class:
5365
National Item Identification Number:
010717565
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 106958 | 01359 | TRIUMPH THERMAL SYSTEMS - MARYLAND, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.364 INCHES MINIMUM AND 0.372 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE DIAMETER | 0.460 INCHES MINIMUM AND 0.475 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT | PASSIVATE | | TEST DATA DOCUMENT | 96193-106958 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|