|
|
|
National Stock Number:
5365-01-088-1817
Federal Supply Class:
5365
National Item Identification Number:
010881817
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2651655-12 | 06848 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| APERTURE DIAMETER | 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.750 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5516 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5513 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.190 INCHES NOMINAL | | OVERALL THICKNESS | 0.011 INCHES MINIMUM AND 0.013 INCHES MAXIMUM | | OVERALL WIDTH | 2.130 INCHES NOMINAL | | SIDE RADIUS FROM GASKET CENTER | 0.875 INCHES NOMINAL | | SPECIAL FEATURES | PROTECTIVE FINISH PER BENDIX ES-091. APPLY ENGRAVE INSTRUCTION BENDIX ES-0465. INVERTED RADIUS 8 X .250R | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|