|
|
|
National Stock Number:
5365-01-090-8920
Federal Supply Class:
5365
National Item Identification Number:
010908920
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 164502-01 | 35351 | GE AVIATION SYSTEMS LLC | | 314-350 | 32559 | BIVAR INC |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.050 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.350 INCHES NOMINAL | | HOLE DIAMETER | 0.030 INCHES MINIMUM AND 0.045 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | PLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC POLYCAPROLACTAM | | OUTSIDE CORNER RADIUS | 0.050 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.050 INCHES NOMINAL | | OVERALL LENGTH | 0.450 INCHES NOMINAL | | OVERALL WIDTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | SPECIAL FEATURES | ALL HOLES COUNTERBORED 0.065 IN. DIA BY 0.0275 IN. DEEP AND 4 PROJECTIONS 0.030 IN. DIA BY 0.030 IN. H LOCATED 0.050 IN. FROM CENTER OF BOLT HOLES OUTSIDE EDGE ALONG THE LG | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|