5365-01-279-8429, SPACER,PLATE

National Stock Number:
5365-01-279-8429

Federal Supply Class:
5365

National Item Identification Number:
012798429

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

6023149

81039

WHIPPANY ACTUATION SYSTEMS, LLC

Techincal Specification:

BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
HOLE DIAMETER	0.154 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
OVERALL LENGTH	0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
OVERALL WIDTH	0.427 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
STYLE DESIGNATOR	NON-CIRCULAR W/BEVELED CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE

Click here to Register for Free 30-day Trial