|
|
|
National Stock Number:
5905-00-402-8014
Federal Supply Class:
5905
National Item Identification Number:
004028014
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 215-00-200 | 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC | | 215-00-200 | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 200.000 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.375 INCHES NOMINAL | | BODY LENGTH | 0.410 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY WIDTH | 0.150 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.419 INCHES NOMINAL | | OVERALL HEIGHT | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 0.632 INCHES NOMINAL | | OVERALL WIDTH | 0.150 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.063 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE(S) | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.035 INCHES NOMINAL | | SHAFT LENGTH | 0.050 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | REAR END LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL LENGTH | 0.187 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|