6150-00-622-1320 WIRING HARNESS,BRANCHED Index 5930-00-622-1343 SWITCH,TOGGLE

National Stock Number:
5905-00-622-1342

Federal Supply Class:
5905

National Item Identification Number:
006221342

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
6371R500L 0.5CT73138BI TECHNOLOGIES CORPORATION
6371R500L5CT73138BI TECHNOLOGIES CORPORATION


Techincal Specification:
SECTION QUANTITY1
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
BODY DIAMETER1.312 INCHES NOMINAL
BODY LENGTH0.625 INCHES NOMINAL
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
ACTUATOR TYPESINGLE SHAFT
SHAFT STYLEROUND
SHAFT DIAMETER0.2497 INCHES MAXIMUM
SHAFT LENGTH0.875 INCHES NOMINAL
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION346.0 NOMINAL
NONTURN DEVICE LOCATIONAT 6 OCLOCK
NONTURN DEVICE RADIUS0.500 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
SHAFT RUNOUT0.001 INCHES
LATERAL RUNOUT0.002 INCHES
PILOT DIAMETER RUNOUT0.0015 INCHES
SHAFT RADIAL PLAY0.001 INCHES
SHAFT BEARING TYPEBALL
MAXIMUM STARTING TORQUE0.07 INCH-OUNCES
MAXIMUM RUNNING TORQUE0.05 INCH-OUNCES
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS0.0 TO 300.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS6.0 FREE AIR SINGLE SECTION
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
FEATURES PROVIDEDHUMIDITY PROOF
TERMINAL TYPE AND QUANTITY4 TURRET
TERMINAL LOCATIONREAR END
RELIABILITY INDICATORNOT ESTABLISHED
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS250.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-0.5 TO 0.5 OHMS SINGLE SECTION
BODY STYLECYLINDRICAL BUSHING MOUNTED


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us