5905-00-730-3965, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-730-3964 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5905-00-730-3965

Federal Supply Class:
5905

National Item Identification Number:
007303965

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

32A3-1384	19006	GULF AND WESTERN MFG CO EAGLE SIGNAL SYSTEMS DIV
57A14C72	02387	NAVAL AIR WARFARE CENTER AIRCRAFT DIV
RC20-01X3-4 502	04454	SENSOR SYSTEMS, L.L.C.
68345-1	24017	COGNITIVE RESOURCES INC DBA GAMEWELL CO THE

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	355.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION	2.000 KILOHMS 2ND SECTION
ELECTRICAL RESISTANCE PER SECTION	2.000 KILOHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION	20.000 KILOHMS 1ST SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	65.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 ALL SECTIONS
BODY DIAMETER	2.000 INCHES NOMINAL
BODY LENGTH	1.625 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL HOLE/SLOT MOUNTED
FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTION	ALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.15 TO 0.15 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.15 TO 0.15 3RD SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.20 TO 0.20 1ST SECTION
MOUNTING FACILITY QUANTITY	3
MOUNTING METHOD	THREADED HOLE(S)
MOUNTING HOLE/STUD CIRCLE DIAMETER	1.250 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-1.0 TO 1.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
SCREW THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
SCREW THREAD DIAMETER	0.164 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
SECTION QUANTITY	3
SHAFT DIAMETER	0.2498 INCHES NOMINAL
SHAFT STYLE	ROUND, SLOTTED
SHAFT LENGTH	0.675 INCHES NOMINAL
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	+0.0 TO 200.0 1ST SECTION
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	+0.0 TO 700.0 2ND SECTION
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	+0.0 TO 700.0 3RD SECTION
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY	9 TURRET
TEST DATA DOCUMENT	02387-57A14C72 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial