5360-00-759-7259 SPRING,HELICAL,EXTENSION Index 5360-00-759-7263 SPRING,HELICAL,COMPRESSION

National Stock Number:
5905-00-759-7262

Federal Supply Class:
5905

National Item Identification Number:
007597262

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
805091-164547HONEYWELL INTERNATIONAL, INC
805091-170210HONEYWELL INTERNATIONAL INC.
805091-172599ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION312.0 MINIMUM AND 340.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION15.000 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION25.000 KILOHMS 2ND SECTION
ELECTRICAL RESISTANCE PER SECTION25.000 KILOHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION25.000 KILOHMS 4TH SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
BEARING TYPEBALL SHAFT
BODY DIAMETER2.030 INCHES MAXIMUM
BODY LENGTH2.360 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 3RD SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 1ST SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 4TH SECTION
LATERAL RUNOUT0.001 INCHES
OVERALL LENGTH3.210 INCHES MAXIMUM
MAXIMUM STARTING TORQUE3.00 INCH-OUNCES
MOUNTING LIP DEPTH0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM
MOUNTING LIP DIAMETER2.05000 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER RUNOUT0.00100 INCHES
PILOT DIAMETER1.00000 INCHES NOMINAL
PILOT LENGTH0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR 1ST SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR 2ND SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR 4TH SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS3.5 FREE AIR 3RD SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY4
SHAFT END PLAY0.00100 INCHES
SHAFT DIAMETER0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.810 INCHES MINIMUM AND 0.850 INCHES MAXIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 ALL SECTIONS
UNDERCUT DIAMETER1.88000 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us