5905-00-825-9372 RESISTOR,FIXED,WIRE WOUND Index 5905-00-825-9376 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-825-9374

Federal Supply Class:
5905

National Item Identification Number:
008259374

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
722373138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION5.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER0.880 INCHES NOMINAL
BODY LENGTH1.580 INCHES NOMINAL
BODY STYLECYLINDRICAL SERVO MOUNTED
CUBIC MEASURE0.776 CUBIC INCHES
FIXED TAP QUANTITY PER SECTION2 SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.05 TO 0.05 SINGLE SECTION
LATERAL RUNOUT0.003 INCHES
MAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
MAXIMUM STARTING TORQUE0.60 INCH-OUNCES
MAXIMUM STOP TORQUE128.00 INCH-OUNCES
MOUNTING LIP DEPTH0.0670 INCHES NOMINAL
MOUNTING LIP DIAMETER0.8800 INCHES NOMINAL
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER RUNOUT0.00150 INCHES
PILOT DIAMETER0.6250 INCHES NOMINAL
PILOT LENGTH0.0670 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.00300 INCHES
SHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.625 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION921.6 SINGLE SECTION AND 3544.61 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS+0.0 TO 130.0 SINGLE SECTION
TERMINAL LOCATIONLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY5 TURRET
UNDERCUT DIAMETER0.781 INCHES MAXIMUM
UNDERCUT WIDTH0.0530 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us