|
|
|
National Stock Number:
5905-00-903-5189
Federal Supply Class:
5905
National Item Identification Number:
009035189
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 500-1299 | 02111 | VISHAY SPRAGUE INC | | 500-1299 | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG | | 737330-01 | 35351 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | BODY LENGTH | 1.563 INCHES MINIMUM AND 1.583 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | NONMETALLIC SHAFT | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 SINGLE SECTION | | OVERALL LENGTH | 1.907 INCHES MINIMUM AND 1.989 INCHES MAXIMUM | | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES | | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.87000 INCHES MINIMUM AND 0.88000 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING(S) | | PILOT DIAMETER | 0.62500 INCHES NOMINAL | | PILOT LENGTH | 0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | TERMINAL LOCATION | UPPER ADJACENT SIDE TWO ROWS LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 35351-737330-01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.78100 INCHES MAXIMUM |
|
|