5905-00-904-0474 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE Index 4810-00-904-0484 COIL AND PLUNGER AS

National Stock Number:
5905-00-904-0483

Federal Supply Class:
5905

National Item Identification Number:
009040483

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
188788-00081413BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
NL7239-1757-073138BI TECHNOLOGIES CORPORATION
NL7239-1757-273138BI TECHNOLOGIES CORPORATION


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION5.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM AND 3620.0 MAXIMUM
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER0.875 INCHES NOMINAL
BODY LENGTH1.594 INCHES NOMINAL
BODY STYLECYLINDRICAL SERVO MOUNTED
FIRST FLAT LENGTH0.560 INCHES NOMINAL
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 SINGLE SECTION
LATERAL RUNOUT0.001 INCHES
OVERALL DIAMETER1.062 INCHES NOMINAL
OVERALL LENGTH2.239 INCHES MINIMUM AND 2.269 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.80 INCH-OUNCES
MAXIMUM STARTING TORQUE1.00 INCH-OUNCES
MAXIMUM STOP TORQUE100.00 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.5
MOUNTING LIP DEPTH0.06200 INCHES NOMINAL
MOUNTING LIP DIAMETER0.87500 INCHES NOMINAL
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER RUNOUT0.00100 INCHES
PILOT DIAMETER0.62400 INCHES MINIMUM AND 0.62500 INCHES MAXIMUM
PILOT LENGTH0.06200 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM AND 3620.0 MAXIMUM
SECTION QUANTITY1
SHAFT END PLAY0.00200 INCHES
SHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT LENGTH0.645 INCHES MINIMUM AND 0.675 INCHES MAXIMUM
SHAFT STYLEROUND, V FLATTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
TERMINAL LOCATIONREAR END LOCATION NOT OTHERWISE SPECIFIED
TERMINAL LENGTH0.250 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG
UNDERCUT DIAMETER0.750 INCHES NOMINAL
UNDERCUT WIDTH0.06200 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us