5905-00-905-1045 RESISTOR,FIXED,FILM Index 5905-00-905-1055 RESISTOR,FIXED,FILM

National Stock Number:
5905-00-905-1047

Federal Supply Class:
5905

National Item Identification Number:
009051047

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
9309-458-073138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION1080.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER2.000 INCHES NOMINAL
BODY LENGTH2.590 INCHES MINIMUM AND 2.652 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDNONMETALLIC SHAFT
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
LATERAL RUNOUT0.0015 INCHES
OVERALL DIAMETER2.000 INCHES NOMINAL
OVERALL LENGTH3.527 INCHES NOMINAL
MAXIMUM RUNNING TORQUE1.40 INCH-OUNCES
MAXIMUM STARTING TORQUE1.80 INCH-OUNCES
MAXIMUM STOP TORQUE600.00 INCH-OUNCES
MOUNTING METHODSERVO MOUNT
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL
MOUNTING LIP DIAMETER2.0000 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS4.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG1260.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.0005 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION540.0 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS1000.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONREAR END LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY4 SOLDER STUD
UNDERCUT DIAMETER1.870 INCHES MAXIMUM
UNDERCUT WIDTH0.0730 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us