|
|
|
National Stock Number:
5905-00-925-3421
Federal Supply Class:
5905
National Item Identification Number:
009253421
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 2314274G2 | 28527 | L3HARRIS TECHNOLOGIES, INC. | | 2314274G2 | 28528 | ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST | | B6659-7 | 09004 | TRANSISTOR DEVICES INC | | R1406 | 09004 | TRANSISTOR DEVICES INC | | R1406 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.172 INCHES MAXIMUM | | BODY LENGTH | 0.672 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | MOUNTING BUSHING LENGTH | 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.563 INCHES NOMINAL | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO 2.0 SINGLE SECTION | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.453 INCHES MINIMUM AND 0.547 INCHES MAXIMUM | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|