5905-00-925-4551, RESISTOR,VARIABLE,WIRE WOUND,PRE

5905-00-925-4552 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5905-00-925-4551

Federal Supply Class:
5905

National Item Identification Number:
009254551

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.

Manufacturer Information:

300-8811	02111	VISHAY SPRAGUE INC
754-6249	12205	BUNKER RAMO CORP AMPHENOL CONTROLS DIV
77C707800P1	03538	LOCKHEED MARTIN CORPORATION
77C707800P1REVE	03538	LOCKHEED MARTIN CORPORATION

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	2.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	85.0 SINGLE SECTION
BEARING TYPE	BALL SHAFT
BODY DIAMETER	1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM
BODY LENGTH	1.000 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION 360 DEG SINE-COSINE
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50 TO 0.50 SINGLE SECTION
OVERALL DIAMETER	1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM
OVERALL LENGTH	1.531 INCHES NOMINAL
MOUNTING LIP DEPTH	0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM
MOUNTING LIP DIAMETER	1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
MOUNTING METHOD	CLAMP RING(S)
PILOT DIAMETER	1.87455 INCHES MINIMUM AND 1.8755 INCHES MAXIMUM
PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	3.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES MAXIMUM
SHAFT STYLE	ROUND
SHAFT LENGTH	0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-100.0 TO 100.0 SINGLE SECTION
TERMINAL LOCATION	RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY	6 SOLDER STUD
TEST DATA DOCUMENT	03538-77C707800+1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER	1.865 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
UNDERCUT WIDTH	0.0550 INCHES MINIMUM

Click here to Register for Free 30-day Trial