5905-00-945-0327 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-00-945-0329 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-945-0328

Federal Supply Class:
5905

National Item Identification Number:
009450328

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2487317-310001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
3250P1-10380294BOURNS INSTRUMENTS INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION9000.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
BODY LENGTH0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL HEIGHT0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
OVERALL LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL WIDTH0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE(S)
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY NAVORD OD44548
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.030 INCHES NOMINAL
SHAFT LENGTH0.083 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
SPECIAL FEATURESMTG HOLES LOCATED DIAGONALLY OPPOSITE ON PLANE FORMED BY LG AND W,PIN-DIA 0.028 IN.
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-30.0 TO 30.0 SINGLE SECTION
TERMINAL LOCATIONLEFT ADJACENT SIDE SINGLE ROW LOCATION NOT OTHERWISE SPECIFIED
TERMINAL LENGTH0.500 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us