|
|
|
National Stock Number:
5905-00-946-7933
Federal Supply Class:
5905
National Item Identification Number:
009467933
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 2325870 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2325870 | 56232 | LOCKHEED MARTIN CORPORATION | | 800-5582 | 02111 | VISHAY SPRAGUE INC | | 2325870REVA | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7603-1910-0 | 73138 | BI TECHNOLOGIES CORPORATION |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 6.25 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.45 TO 0.45 SINGLE SECTION | | MAXIMUM STOP TORQUE | 100.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.30 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.90 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 1.8740 INCHES MINIMUM AND | | 1.8750 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND | | 1.875 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL | | BODY DIAMETER | 2.000 INCHES NOMINAL | | BODY LENGTH | 4.000 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 0.609 INCHES MINIMUM AND | | 0.641 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7380.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7380.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | FEATURES PROVIDED | NONMETALLIC SHAFT | | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 10001-2325870 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 4.641 INCHES MAXIMUM | | OVERALL DIAMETER | 2.116 INCHES MAXIMUM |
|
|