5935-01-057-8393 JACKSCREW,ELECTRICAL CONNECTOR Index 5905-01-057-8395 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-057-8394

Federal Supply Class:
5905

National Item Identification Number:
010578394

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
437523-051PQF4CAE USA INC.
437523-0536378RAYTHEON TECHNICAL SERVICES COMPANY
70841A10112GENERAL DYNAMICS MOTION CONTROL LLC
70F4198659DONEL SYSTEMS LLC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
ANGLE OF MOUNTING HOLE IN DEG90.0
BODY DIAMETER3.000 INCHES NOMINAL
BODY LENGTH1.850 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
MAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
MAXIMUM STARTING TORQUE0.50 INCH-OUNCES
MOUNTING FACILITY QUANTITY3
MOUNTING HOLE/STUD CIRCLE DIAMETER1.750 INCHES NOMINAL
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER3.0000 INCHES NOMINAL
MOUNTING METHODTHREADED HOLE
PILOT LENGTH0.0620 INCHES NOMINAL
PILOT DIAMETER0.7500 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS0.8 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SCREW THREAD DIAMETER0.164 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNC
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES MAXIMUM
SHAFT LENGTH0.438 INCHES NOMINAL
SHAFT STYLEROUND
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION120.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-0.5 TO 0.5 DEG ANGULAR ROTATION SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY4 TURRET
UNDERCUT DIAMETER2.875 INCHES MAXIMUM
UNDERCUT WIDTH0.0930 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us