5905-01-088-8176 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5910-01-088-8179 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5905-01-088-8177

Federal Supply Class:
5905

National Item Identification Number:
010888177

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
3541H-1-20232997BOURNS INC
3541H-1-2023Z867BOURNS, INC.
P39023-00218876U S ARMY AVIATION AND MISSILE COMMAND
P39023-002A18876U S ARMY AVIATION AND MISSILE COMMAND
3541S-1-20232997BOURNS INC
SE00088-232K0216THALES OPTRONICS LIMITED


Techincal Specification:
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
BODY LENGTH0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION2.000 KILOHMS SINGLE SECTION
FIRST FLAT LENGTH0.625 INCHES NOMINAL
FLAT HEIGHT0.216 INCHES NOMINAL
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
LATERAL RUNOUT0.005 INCHES
PILOT DIAMETER RUNOUT0.00300 INCHES
MAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
MAXIMUM STARTING TORQUE0.50 INCH-OUNCES
MOUNTING BUSHING LENGTH0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT LENGTH0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM
SHAFT DIAMETER0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
SHAFT END PLAY0.01000 INCHES
SHAFT RADIAL PLAY0.003 INCHES
SHAFT RUNOUT0.003 INCHES
SHAFT STYLEROUND, FLATTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us