5905-01-090-2997 RESISTOR,VARIABLE,WIRE WOUND,PRE Index 5905-01-090-2999 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-090-2998

Federal Supply Class:
5905

National Item Identification Number:
010902998

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
1320-104711534BEI SENSORS & SYSTEMS COMPANY, INC.
6757-201111871RECON/OPTICAL, INC.
6757-201180294BOURNS INSTRUMENTS INC


Techincal Specification:
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER60.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
BEARING TYPEBALL SHAFT
BODY DIAMETER1.062 INCHES NOMINAL
BODY LENGTH1.900 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION352.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION AND 20.0 KILOHMS 2ND SECTION
FEATURES PROVIDEDSWITCH
FIXED TAP QUANTITY PER SECTION1 1ST SECTION AND 3 2ND SECTION
FUNCTION CHARACTERISTIC PER SECTION1ST SECTION 180 DEG SINE AND 2ND SECTION LINEAR
FUNCTION CONFORMITY PER SECTION1ST SECTION ABSOLUTE CONFORMITY AND 2ND SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.50 TO 1.50 1ST SECTION AND -0.50 TO 0.50 2ND SECTION
LATERAL RUNOUT0.002 INCHES
PILOT DIAMETER0.9688 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.0015 INCHES
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES
MAXIMUM STARTING TORQUE0.30 INCH-OUNCES
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER1.0620 INCHES NOMINAL
MOUNTING METHODCLAMP RING
POWER DISSIPATION RATING PER SECTION IN WATTS0.75 FREE AIR 1ST SECTION AND 2.0 FREE AIR 2ND SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY2
SHAFT LENGTH0.625 INCHES NOMINAL
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT END PLAY0.003 INCHES
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND, SLOTTED
SWITCH OPERATING POSITIONSTART OF ROTATION
SWITCH TYPEROTARY
SWITCH VOLTAGE RATING IN VOLTS12.0
SWITCH CONTACT ARRANGEMENTSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
SWITCH CURRENT TYPE AND RATING IN AMPS0.0012 DC
TAP LOCATION TOLERANCE PER SECTION-1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION90.0 1ST SECTION AND 10.0 2ND SECTION AND 35.0 2ND SECTION AND 60.0 2ND SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-300.0 TO 300.0 1ST SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY12 TURRET
UNDERCUT DIAMETER0.975 INCHES MAXIMUM
UNDERCUT WIDTH0.0620 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us