5905-01-100-9134 RESISTOR,FIXED,COMPOSITION Index 5305-01-100-9137 SCREW,MACHINE

National Stock Number:
5905-01-100-9136

Federal Supply Class:
5905

National Item Identification Number:
011009136

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
7286R50KL.273138BI TECHNOLOGIES CORPORATION
7286R50KL.2573133NUTEC DESIGN ASSOCIATES INC
7286R50KL.2573138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM AND 3610.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BEARING TYPESLEEVE SHAFT
BODY DIAMETER0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
BODY LENGTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
CUBIC MEASURE0.477 CUBIC INCHES
FEATURES PROVIDEDHUMIDITY PROOF
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
LATERAL RUNOUT0.005 INCHES
MAXIMUM RUNNING TORQUE0.80 INCH-OUNCES
MAXIMUM STARTING TORQUE0.80 INCH-OUNCES
MAXIMUM STOP TORQUE60.00 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION1.0
MOUNTING BUSHING LENGTH0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
PILOT DIAMETER RUNOUT0.004 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM AND 3615.0 MAXIMUM
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SECTION QUANTITY1
SHAFT END PLAY0.010 INCHES
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT RADIAL PLAY0.003 INCHES
SHAFT RUNOUT0.003 INCHES
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS25000.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-3.0 TO 3.0 DEG ANGULAR ROTATION SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY4 TURRET


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us