5910-01-145-0334 CAPACITOR,FIXED,MICA DIELECTRIC Index 5905-01-145-0336 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-145-0335

Federal Supply Class:
5905

National Item Identification Number:
011450335

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2635-013-01-1096169ELECTRIC BOAT CORPORATION
4858076 ITEM 1780064NAVAL SHIP SYSTEMS COMMAND
845-4687683-1004454SENSOR SYSTEMS, L.L.C.
845-4687683-1006880DATA INSTRUMENTS INC
845-4687683-1008815HONEYWELL INTERNATIONAL INC
845-4687683-1011534BEI SENSORS & SYSTEMS COMPANY, INC.
CP15-27304454SENSOR SYSTEMS, L.L.C.
845-4687683-1080064NAVAL SHIP SYSTEMS COMMAND
845-4687683-1094603HONEYWELL SENSING & CONTROL


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION5.000 KILOHMS ALL SECTIONS
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
BEARING TYPEBALL SHAFT
BODY DIAMETER1.437 INCHES NOMINAL
BODY LENGTH2.820 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
CUBIC MEASURE4.574 CUBIC INCHES
FIXED TAP QUANTITY PER SECTION1 ALL SECTIONS
FUNCTION CHARACTERISTIC PER SECTION1ST SECTION GRAPH AND 2ND SECTION LINEAR AND 3RD SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 ALL SECTIONS
LATERAL RUNOUT0.002 INCHES
OVERALL DIAMETER2.188 INCHES MAXIMUM
OVERALL LENGTH4.667 INCHES MAXIMUM
MAXIMUM STARTING TORQUE3.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE2.40 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION1.0
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL
MOUNTING LIP DIAMETER1.4370 INCHES NOMINAL
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER RUNOUT0.00100 INCHES
PILOT DIAMETER1.3120 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT-5.0 TO 5.0 -65 DEG CELSIUS ALL SECTIONS AND -4.0 TO 4.0 -15 DEG CELSIUS ALL SECTIONS AND -2.5 TO 2.5 50 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 75 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 105 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 125 DEG CELSIUS ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG350.0 NOMINAL
SECTION QUANTITY3
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT END PLAY0.00500 INCHES
SHAFT LENGTH1.812 INCHES NOMINAL
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND
UNDERCUT DIAMETER1.313 INCHES MAXIMUM
UNDERCUT WIDTH0.0730 INCHES NOMINAL
TAP LOCATION TOLERANCE PER SECTION-1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION174.5 ALL SECTIONS
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY12 TURRET


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us