|
|
|
National Stock Number:
5905-01-283-7084
Federal Supply Class:
5905
National Item Identification Number:
012837084
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5905PL0911293 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | C8909-2-501C | 35627 | PRECISION ELECTRONICS CORPORATION |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 0.896 INCHES MINIMUM AND | | 0.916 INCHES MAXIMUM | | BODY LENGTH | 0.443 INCHES MINIMUM AND | | 0.463 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, FLATTED | | FIRST FLAT LENGTH | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | FLAT HEIGHT | 0.211 INCHES MINIMUM AND | | 0.221 INCHES MAXIMUM | | SHAFT DIAMETER | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | SHAFT LENGTH | 0.865 INCHES MINIMUM AND | | 0.885 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 251.0 MINIMUM AND | | 318.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 251.0 MINIMUM AND | | 318.0 MAXIMUM | | NONTURN DEVICE RADIUS | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | HUMIDITY PROOF | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 81755-C8909 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | CUBIC MEASURE | 2.987 CUBIC INCHES | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|