|
|
|
National Stock Number:
5910-00-419-9931
Federal Supply Class:
5910
National Item Identification Number:
004199931
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 0F30-103Y | 99120 | PLASTIC CAPACITORS INC | | 632903-44 | 56232 | LOCKHEED MARTIN CORPORATION | | GC246L103 | 72928 | GULTON INDUSTRIES INC GUDEMAN DIV | | OF30-103Y | 99120 | PLASTIC CAPACITORS INC |
|
Techincal Specification:
| BODY DIAMETER | 0.531 INCHES NOMINAL | | BODY LENGTH | 1.562 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.010 MICROFARADS SINGLE SECTION | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 30.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS | | INTERNAL ELECTRICAL CONNECTION TYPE | INSERTED TAB | | MATERIAL | GLASS CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 3000.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TERMINAL LENGTH | 1.625 INCHES MINIMUM AND 2.625 INCHES MAXIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 13604-632903 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -20.00 TO 20.00 PERCENT SINGLE SECTION |
|
|