| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.125 INCHES NOMINAL |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.2000 |
| BODY HEIGHT | 2.000 INCHES NOMINAL |
| BODY LENGTH | 2.062 INCHES NOMINAL |
| BODY STYLE | W/MTG TABS/FLANGES, TERMINALS ON OPPOSITE SURFACES |
| BODY WIDTH | 2.312 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 8.000 MICROFARADS SINGLE SECTION |
| CASE MATERIAL | METAL |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 30.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | 0.0 DEG CELSIUS MINIMUM AND 70.0 DEG CELSIUS MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -0.25/+0.25 PERCENT SINGLE SECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -120.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 10001-2557885 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |