|
|
|
National Stock Number:
5910-01-070-8458
Federal Supply Class:
5910
National Item Identification Number:
010708458
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 25419W | 13058 | SORA POWER INC. | | 25419W | 58880 | MEGGITT (NEW HAMPSHIRE), INC | | 60F618TNP | 10026 | CSI TECHNOLOGIES, INC. | | 724518-1 | 05869 | RAYTHEON COMPANY | | 724518-1 | 21966 | TDL, INC | | RC01052 | 13619 | EMS DEVELOPMENT CORPORATION | | RC1052 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY HEIGHT | 12.500 INCHES NOMINAL | | BODY LENGTH | 9.380 INCHES NOMINAL | | BODY STYLE | W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 4.000 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.250 MICROFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE AND MOUNTING HARDWARE | | INSULATION RESISTANCE AT REFERENCE TEMP | 20000.0 MEGOHMS | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF | | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED MOUNTING HOLES | | NOMINAL THREAD SIZE | 0.250 INCHES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50000.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -46.0 CELSIUS MINIMUM AND 71.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL HEIGHT FROM BODY | 0.440 INCHES NOMINAL | | TERMINAL DIAMETER | 0.250 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 STANDOFF, THREADED STUD | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|