| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.3000 |
| BODY HEIGHT | 0.156 INCHES NOMINAL |
| BODY LENGTH | 0.375 INCHES NOMINAL |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.188 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 9.100 PICOFARADS SINGLE SECTION |
| CASE MATERIAL | GLASS |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.300 INCHES NOMINAL |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 100000.0 MEGOHMS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 500000.0 MEGOHMS |
| MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | C |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0100 |
| RELIABILITY INDICATOR | ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| QUALITY FACTOR AT REFERENCE TEMP | 2000.0000 |
| TEST DATA DOCUMENT | 81349-MIL-C-23269 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE RANGE PER SECTION | -0.25 TO 0.25 PICOFARADS SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -25.0 TO 25.0 SINGLE SECTION |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-23269/5 GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 105.0 SINGLE SECTION |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| TERMINAL LENGTH | 1.125 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |