5910-01-076-0966, CAPACITOR,FIXED,PLASTIC DIELECTR

5910-01-076-0965 CAPACITOR,FIXED,PLASTIC DIELECTR

5910-01-076-0967 CAPACITOR,FIXED,PLASTIC DIELECTR

National Stock Number:
5910-01-076-0966

Federal Supply Class:
5910

National Item Identification Number:
010760966

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

10309789	A486G	NIMIKKEISTOKESKUS NCB FINLAND
SM-C-447401-1	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

BODY HEIGHT	0.126 INCHES MINIMUM AND 0.283 INCHES MAXIMUM
BODY LENGTH	0.606 INCHES MINIMUM AND 0.763 INCHES MAXIMUM
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY WIDTH	0.276 INCHES MINIMUM AND 0.433 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION	0.033 MICROFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	1.000
INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL
INSULATION RESISTANCE AT REFERENCE TEMP	10000.0 MEGOHM-MICROFARADS
MATERIAL	PLASTIC CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	100.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL DIAMETER	0.032 INCHES NOMINAL
TERMINAL LENGTH	1.370 INCHES MINIMUM AND 1.490 INCHES MAXIMUM
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION

Click here to Register for Free 30-day Trial