5910-01-085-9004, CAPACITOR,FIXED,PLASTIC DIELECTR

5910-01-085-9003 CAPACITOR,FIXED,PLASTIC DIELECTR

5910-01-085-9005 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5910-01-085-9004

Federal Supply Class:
5910

National Item Identification Number:
010859004

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

950B1C224	14752	ELECTROCUBE, INC.
950B1C224J	14752	ELECTROCUBE, INC.

Techincal Specification:

BODY HEIGHT	0.410 INCHES NOMINAL
BODY LENGTH	0.950 INCHES NOMINAL
BODY WIDTH	0.320 INCHES NOMINAL
BODY STYLE	W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
CAPACITANCE VALUE PER SECTION	0.220 MICROFARADS SINGLE SECTION
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.1000
DIELECTRIC MATERIAL	PLASTIC POLYETHYLENE TEREPHTHALATE
INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	5000.0 MEGOHM-MICROFARADS
INSULATION RESISTANCE AT REFERENCE TEMP	250000.0 MEGOHM-MICROFARADS
MATERIAL	PLASTIC CASE
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	135.0 AC-RMS SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION
TERMINAL LENGTH	2.000 INCHES MINIMUM
TERMINAL DIAMETER	0.025 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS	-3.0 TO 2.0 SINGLE SECTION

Click here to Register for Free 30-day Trial