| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -0.50/+0.50 PICOFARADS SINGLE SECTION |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.500 |
| BODY DIAMETER | 0.255 INCHES MAXIMUM |
| BODY LENGTH | 0.540 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, RADIAL TERMINALS |
| CAPACITANCE VALUE PER SECTION | 3.300 PICOFARADS SINGLE SECTION |
| CASE MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.250 INCHES NOMINAL |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10.0 MEGOHMS |
| INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS |
| III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 100.0 SINGLE SECTION |
| PROPRIETARY CHARACTERISTICS | PACS |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 750.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | 55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| QUALITY FACTOR AT REFERENCE TEMP | 1000.000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |