5915-01-040-7534 FILTER,RADIO FREQUENCY INTERFERE Index 5930-01-040-7536 SWITCH,PRESSURE-THERMOSTATIC

National Stock Number:
5915-01-040-7535

Federal Supply Class:
5915

National Item Identification Number:
010407535

Description:
FILTER,RADIO FREQUENCY INTERFERE

Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.


Manufacturer Information:
213-23581833AEROCONTROLEX GROUP, INC.
GF2343-307294GENISCO FILTER CORP
GF2343-407294GENISCO FILTER CORP
GF2343-413050SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON


Techincal Specification:
OPERATING CURRENT RATING PER FUNCTION IN AMPS6.0 1ST RADIO INTERFERENCE 1ST FUNCTION
6.0 2ND RADIO INTERFERENCE 2ND FUNCTION
INCLOSURE TYPEENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION
2 WIRE LEAD OUTPUT 2ND FUNCTION
MOUNTING FACILITY TYPE AND QUANTITY2 SLOT 1ST FUNCTION
2 UNTHREADED HOLE 2ND FUNCTION
STYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON ADJACENT SURFACES
SOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
LOAD IMPEDANCE PER FUNCTION50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION100.0 VOLTS DC 1ST RADIO INTERFERENCE 1ST FUNCTION
100.0 VOLTS DC 2ND RADIO INTERFERENCE 2ND FUNCTION
OVERALL LENGTH3.125 INCHES NOMINAL
OVERALL HEIGHT2.515 INCHES MAXIMUM
OVERALL WIDTH1.190 INCHES NOMINAL
BODY LENGTH2.125 INCHES NOMINAL
BODY WIDTH1.190 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER0.204 INCHES MINIMUM AND
0.214 INCHES MAXIMUM
MOUNTING SLOT WIDTH0.204 INCHES MINIMUM AND
0.214 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.625 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.695 INCHES NOMINAL
INPUT TERMINAL MANUFACTURER CODE81349
INPUT TERMINAL IDENTIFICATIONM81511/02H10-03P1
BODY MATERIALMETAL
BODY SURFACE TREATMENTTIN


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us