| ACCOMMODATED FUSE LENGTH | 0.391 INCHES NOMINAL |
| BASE THICKNESS | 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| BODY STYLE | SIDE BARRIER TYPE |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 60.0 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 1 POLE, MAINLINE, FUSED |
| OVERALL HEIGHT | 1.016 INCHES MAXIMUM |
| OVERALL LENGTH | 3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM |
| OVERALL WIDTH | 0.844 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE MME MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE MSI-30 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE CONTACT |
| MATERIAL | COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 CONTACT |
| MATERIAL | PLASTIC MELAMINE AND SILICA AND PLASTIC SILICONE AND GLASS FIBER BODY |
| MOUNTING HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | IN-LINE ALONG THE LENGTH |
| MOUNTING HOLE QUANTITY | 2 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE TERMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE TERMINAL |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 2 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-F-5373C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |