|
|
|
National Stock Number:
5920-00-877-9348
Federal Supply Class:
5920
National Item Identification Number:
008779348
Description:
FUSEHOLDER,BLOCK
Detail:
A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
|
Manufacturer Information:
| 05G10062-0001 | 25230 | MAGNETEK INC INDUSTRIAL CONTROLS GROUP DIV DBA MAGNETEK | | 265-1265-010 | 13499 | ROCKWELL COLLINS, INC. | | 940-10062-0001 | 04801 | L3HARRIS MARITIME POWER & ENERGY SOLUTIONS, INC | | 3553-1 | 71400 | COOPER BUSSMANN, LLC | | 3553-2 | 71400 | COOPER BUSSMANN, LLC | | 356001 | 75915 | LITTELFUSE, INC. | | VG3241 | 3E191 | RAULAND-BORG CORP | | A-A-55518/2 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55518/02-001 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FH22AM | 71400 | COOPER BUSSMANN, LLC | | FH22AM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M21346/3-14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILF21346-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL | | ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL | | BASE THICKNESS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | BODY STYLE | CLIP CONNECTED TYPE | | CURRENT CARRYING RATING IN AMPS | 30.0 | | FUSE ACCOMMODATION QUANTITY | 1 | | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE | | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 1 POLE, MAINLINE, FUSED | | OVERALL HEIGHT | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM | | OVERALL LENGTH | 2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM | | OVERALL WIDTH | 0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | | MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 1 | | MOUNTING HOLE STYLE | ONE HOLE MOUNTING | | VOLTAGE IN VOLTS | 250.0 | | TERMINAL TYPE AND QUANTITY | 2 SCREW | | TEST DATA DOCUMENT | 81349-MIL-F-21346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|