5925-01-086-6404, CIRCUIT BREAKER

National Stock Number:
5925-01-086-6404

Federal Supply Class:
5925

National Item Identification Number:
010866404

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

3360005-009	92755	NORTHROP GRUMMAN SYSTEMS CORP
AP112-1879-9	81541	SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

POLE QUANTITY	3
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	3.0 AMPERES AC FIRST LOCATION
	3.0 AMPERES AC SECOND LOCATION
	5.0 AMPERES DC THIRD LOCATION
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	6 WIRE HOOK
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC FIRST LOCATION
	240.0 AC SECOND LOCATION
	50.0 DC THIRD LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
RESET METHOD	MANUAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING W/PANEL SEAL
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
FREQUENCY IN HERTZ	60.0 ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC AND
	1000.0 DC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.085 MINIMUM AT 200 PCT AND
	0.600 MAXIMUM AT 200 PCT ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BUSHING LENGTH	0.380 INCHES MAXIMUM
BODY LENGTH	1.562 INCHES MAXIMUM
BODY WIDTH	1.937 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.906 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.625 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.828 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNEF
NOMINAL THREAD SIZE	0.375 INCHES
THREAD QUANTITY PER INCH	32
THREAD PITCH DIAMETERS	0.3503 TO 0.3537 INCHES
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	BETWEEN POLE ONE AND TWO
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	SHOCKPROOF AND
	VIBRATIONPROOF AND
	HERMETICALLY SEALED
TEST DATA DOCUMENT	92755-3360005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial