| CONTACT LOAD CURRENT RATING | 100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 200.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.440 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.216 INCHES NOMINAL SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 1 |
| OVERALL HEIGHT | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| OVERALL LENGTH | 1.765 INCHES MINIMUM AND 1.845 INCHES MAXIMUM |
| OVERALL WIDTH | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | PIN AT 5:00 OCLOCK |
| NONTURN DEVICE RADIUS | 0.360 INCHES NOMINAL AT 5:00 OCLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 2 SINGLE SECTION REAR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 45.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.855 INCHES MINIMUM AND 0.895 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| SPECIAL FEATURES | GOLD PLATED CONTACTS |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786/5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 2 SINGLE SECTION REAR |