| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 30.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.438 INCHES NOMINAL SINGLE ACTUATOR |
| FLAT HEIGHT | 0.220 INCHES NOMINAL SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
| INDIVIDUAL SECTION QUANTITY | 3 |
| OVERALL DIAMETER | 1.010 INCHES NOMINAL |
| OVERALL LENGTH | 2.830 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING FIRST MOUNTING FACILITY |
| MOUNTING METHOD | THREADED STUD(S) SECOND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.112 INCHES SECOND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES FIRST MOUNTING FACILITY |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS AND ROTOR SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 270.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT LENGTH | 0.560 INCHES NOMINAL SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 10 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 36.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A FIRST MOUNTING FACILITY |
| THREAD CLASS | 2A SECOND MOUNTING FACILITY |
| THREAD LENGTH | 0.250 INCHES NOMINAL FIRST MOUNTING FACILITY |
| THREAD LENGTH | 0.250 INCHES NOMINAL SECOND MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 40 SECOND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF FIRST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) SECOND MOUNTING FACILITY |
| THROW QUANTITY | 10 EACH SECTION REAR |