| CONTACT LOAD CURRENT RATING | 0.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| DETENT ROTATIONAL TORQUE RANGE | +1.000 TO 5.000 INCH-POUNDS SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM SINGLE ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 1 |
| OVERALL HEIGHT | 0.995 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.468 INCHES MINIMUM AND 1.483 INCHES MAXIMUM |
| OVERALL WIDTH | 0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| NONTURN DEVICE RADIUS | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -40.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 SINGLE SECTION REAR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 90.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.718 INCHES MINIMUM AND 0.733 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR |
| WIDTH BETWEEN FLATS | 0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 2 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 80063-SMD415284 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 2 SINGLE SECTION REAR |