| CONTACT LOAD CURRENT RATING | 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| CONTACT VOLTAGE RATING IN VOLTS | 110.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.350 INCHES NOMINAL SECOND ACTUATOR |
| FIRST FLAT LENGTH | 0.406 INCHES NOMINAL FIRST ACTUATOR |
| FLAT HEIGHT | 0.093 INCHES NOMINAL SECOND ACTUATOR |
| FLAT HEIGHT | 0.218 INCHES NOMINAL FIRST ACTUATOR |
| INDIVIDUAL SECTION QUANTITY | 2 |
| OVERALL DIAMETER | 1.312 INCHES NOMINAL |
| OVERALL LENGTH | 2.905 INCHES NOMINAL |
| MOUNTING METHOD | THREADED BUSHING WITH PANEL SEAL SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 OCLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS AND ROTOR SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 330.0 DEGREES FROM NONTURN DEVICE SECOND ACTUATOR |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 90.0 DEGREES FROM NONTURN DEVICE FIRST ACTUATOR |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.500 INCHES NOMINAL FIRST ACTUATOR |
| SHAFT LENGTH | 0.875 INCHES NOMINAL SECOND ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SECOND ACTUATOR |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED FIRST ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SECOND ACTUATOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 7 FIRST ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES ALL ACTUATORS |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 3 SECOND SECTION FRONT |
| THROW QUANTITY | 7 FIRST SECTION FRONT |