5935-00-081-3630 CONNECTOR,PLUG,ELECTRICAL Index 5365-00-081-3633 SPACER,SLEEVE

National Stock Number:
5935-00-081-3632

Federal Supply Class:
5935

National Item Identification Number:
000813632

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
47A529842P2423991LOCKHEED MARTIN CORPORATION
B52000123788818KEARFOTT CORPORATION
PTB-22-55PSY77820AMPHENOL CORP
PTB-22-55PSY(001)77820AMPHENOL CORP
MIL-DTL-2648281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3119E22-55Y96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY STYLESTRAIGHT SHAPE W/FLANGE
OVERALL LENGTH1.406 INCHES MAXIMUM
OVERALL HEIGHT1.578 INCHES MAXIMUM
OVERALL WIDTH1.578 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.250 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.688 INCHES MINIMUM AND
0.719 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND
0.125 INCHES MAXIMUM
CONNECTOR LOCKING METHODBAYONET PIN
SHELL TYPESOLID
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTCADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG226.0
MATING END QUANTITY2
CONTACT POSITION ARRANGEMENT STYLE22-55 ALL MATING ENDS
INCLUDED CONTACT QUANTITY55 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPEROUND PIN 1ST MATING END ALL CONTACT GROUPINGS
ROUND SOCKET 2ND MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS600.0 ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTGOLD AND
COPPER ALL MATING ENDS ALL CONTACT GROUPINGS
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND
SALT WATER RESISTANT AND
VIBRATION RESISTANT
TEST DATA DOCUMENT81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-C-26482 GOVERNMENT SPECIFICATION
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.055 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-DTL-26482
MANUFACTURERS CODE96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMS3119E22-55Y


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us