|
|
|
National Stock Number:
5935-00-082-0725
Federal Supply Class:
5935
National Item Identification Number:
000820725
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 15T3100 | 94375 | LAX ELECTRONICS, INC. | | 334737 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | TNC SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | TURRET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.031 INCHES MINIMUM AND | | 1.062 INCHES MAXIMUM | | BUSHING DIAMETER | 0.422 INCHES MINIMUM AND | | 0.453 INCHES MAXIMUM | | OVERALL HEIGHT | 0.734 INCHES MINIMUM AND | | 0.766 INCHES MAXIMUM | | OVERALL WIDTH | 0.734 INCHES MINIMUM AND | | 0.766 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.526 INCHES MINIMUM AND | | 0.536 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.526 INCHES MINIMUM AND | | 0.536 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.609 INCHES MINIMUM AND | | 0.641 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.134 INCHES MINIMUM AND | | 0.138 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.437 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | SILVER | | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | PRECIOUS MATERIAL | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.105 SILVER GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACTS AND SHELL SURFACE SILVER |
|
|