|
|
|
National Stock Number:
5935-00-086-5560
Federal Supply Class:
5935
National Item Identification Number:
000865560
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 167-9912 | 99747 | TELEDYNE DEFENSE ELECTRONICS, LLC | | 846905-3 | 00779 | TE CONNECTIVITY CORPORATION | | 846905-3 | 2H631 | TE CONNECTIVITY CORPORATION |
|
Techincal Specification:
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 8 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 2.220 INCHES MINIMUM AND | | 2.260 INCHES MAXIMUM | | OVERALL HEIGHT | 1.860 INCHES MINIMUM AND | | 1.900 INCHES MAXIMUM | | OVERALL WIDTH | 1.860 INCHES MINIMUM AND | | 1.900 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.546 INCHES MINIMUM AND | | 1.566 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.546 INCHES MINIMUM AND | | 1.566 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.164 INCHES MINIMUM | | THREADED DEVICE TYPE | BACK SHELL | | THREAD SERIES DESIGNATOR | UNS | | NOMINAL THREAD SIZE | 1.188 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 24 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | STEEL | | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE | | INSERT POSITION IN DEG | 0.0 | | INSERT MATERIAL | GLASS SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | SPECIAL FEATURES | HERMETIC SEALED |
|
|