| BODY STYLE | ANGLE, SHAPE, INTERNAL COUPLING |
| CABLE ENTRANCE DIAMETER | 0.332 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,CONDITION RT FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | TNC SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE II,CLASS 2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-14550,CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| OVERALL DIAMETER | 0.750 INCHES NOMINAL |
| OVERALL HEIGHT | 1.221 INCHES MINIMUM AND 1.253 INCHES MAXIMUM |
| OVERALL LENGTH | 1.357 INCHES MINIMUM AND 1.452 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| OPERATING TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 260.0 FAHRENHEIT MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD AND SHELL SURFACE SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY AND 0.100 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMPOSITION 22,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TYPE II,GRADE A FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | SILVER |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | COUPLING FACILITY |