| BODY LENGTH | 8.188 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING W/STRAIN RELIEF |
| CABLE ENTRANCE DIAMETER | 1.217 INCHES MINIMUM AND 1.342 INCHES MAXIMUM |
| CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 135.0 SINGLE MATING END FIRST CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 41.0 SINGLE MATING END SECOND CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 1250.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| ENVIRONMENTAL PROTECTION | THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT QUANTITY | 5 SINGLE MATING END SECOND CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 2 SINGLE MATING END FIRST CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC SINGLE MATING END |
| INSERT POSITION IN DEG | 15.0 |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 2.250 INCHES |
| OVERALL DIAMETER | 2.562 INCHES MAXIMUM |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.035 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 FED SPEC 2ND TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM AND NICKEL |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 96906-MS90556 GOVERNMENT STANDARD |
| TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS |
| TEST DATA DOCUMENT | 81349-MIL-C-22992 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 3 |
| THREAD SERIES DESIGNATOR | ACME |
| THREAD PITCH DIAMETERS | +0.148 TO 0.163 INCHES |
| THREADED DEVICE TYPE | COUPLING FACILITY |