5935-01-200-6317 CONNECTOR,PLUG,ELECTRICAL Index 5935-01-200-6319 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-200-6318

Federal Supply Class:
5935

National Item Identification Number:
012006318

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M83733/5RA01881349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-83733/581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-83733/581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.519 INCHES MINIMUM AND 0.534 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.558 INCHES MINIMUM AND 0.566 INCHES MAXIMUM
CONNECTOR LOCKING METHODFRICTION
CONTACT POSITION ARRANGEMENT STYLE"18,018" SINGLE MATING END
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH2.574 INCHES MINIMUM AND 2.582 INCHES MAXIMUM
ENVIRONMENTAL PROTECTIONHUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY18 SINGLE MATING END SINGLE CONTACT GROUPING
OVERALL HEIGHT1.170 INCHES MAXIMUM
OVERALL LENGTH1.350 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
OVERALL WIDTH3.028 INCHES MAXIMUM
MATING END QUANTITY1
POLARIZATION METHODMATING END
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT0.018 GOLD GRAINS, TROY
PRECIOUS MATERIALGOLD
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-26074,GRADE B,CL 3 OR 4 MIL SPEC SINGLE TREATMENT RESPONSE
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTNICKEL
SHELL TYPESOLID
SPECIAL FEATURESFURNISHED ITEMS - MOUNTING NUT
SPECIFICATION/STANDARD DATA81349-MIL-C-83733/5 GOVERNMENT SPECIFICATION
UNTHREADED MOUNTING HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT81349-MIL-C-83733 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us